SERIES: SNT-AI-CAS
PILOT READY
Target Safety Problems
Forklift-Pedestrian Collision Risk
Vehicle-Obstacle Collision Risk
Industrial Projection Hardware
AI Collision Avoidance System
AI vision collision-avoidance platform for detecting pedestrians or obstacles and triggering visual, acoustic or control responses in industrial areas.
Power Output
System-dependent camera / edge-controller configuration
Input Voltage
12-24VDC
Typical Height
3-10M
Protection
IP65 Rated
Application Engineering Note
Projection visibility is determined by mounting height, ambient lux, lens optic selection, and floor reflectivity. SNT provides exact Gobo pattern sizing and optical validation prior to pilot deployment.
Engineering Parameters
Technical Specifications & Optical Sizing
All measurements verified at 25°C ambient conditions.
Standard Parameters Verified Values
- Rated Output
- 72w/120w
- Operating Voltage
- 12-24VDC
- Optimum Projection Distance
- 3-10M
- Standard Lens Angle
- 45°
- Light Source
- AI vision camera + edge processing
- Power / Output
- System-dependent camera / edge-controller configuration
- Input Voltage
- Project-specific DC/AC supply depending on camera and controller
- Recommended Installation Height
- Camera mounting height project-specific
- Environmental Protection
- Camera/enclosure rating to verify per final configuration
- Control Mode
- Visual / acoustic alert, relay output, optional vehicle or PLC interface
- Data Status
- Draft reference configuration — verify against final SNT datasheet before publishing
Environmental & Compliance Industrial Grade
- Ingress Protection
- IP65 (Dust-tight & Water Jet Protected)
- Operating Temperature
- -20°C to +50°C
- Housing Material
- Die-cast Aluminum Alloy 6063
- Optical Glass
- High-Transmittance Coated Quartz Lens
- IP Rating
- 65
Detailed Description & Functional Overview
AI vision collision-avoidance platform for detecting pedestrians or obstacles and triggering visual, acoustic or control responses in industrial areas.
Typical Applications
This product series is intended for industrial visual safety projects where configuration must be matched to actual site conditions.Reference Configuration
- Light / Signal Source: AI vision camera + edge processing
- Power / Output: System-dependent camera / edge-controller configuration
- Input Voltage: Project-specific DC/AC supply depending on camera and controller
- Recommended Installation Height: Camera mounting height project-specific
- Environmental Protection: Camera/enclosure rating to verify per final configuration
- Control: Visual / acoustic alert, relay output, optional vehicle or PLC interface
Lens / Optical Configuration
- Camera Field of View: Project-specific — Detection zone defined in software. No projection lens; ACF lens field used to record camera viewing configuration.
- Wide-Angle Camera Option: Project-specific — Wider detection zone. Verify detection distance and mounting geometry during pilot.
Selection Information Required
Please provide the application, mounting height, projection/detection distance, ambient light, required marking or detection area, floor/environment conditions, trigger logic and project quantity before final configuration. Draft website data: reference specifications must be verified against the final SNT datasheet before publication or quotation.
System Integration
Compatible Safety Solutions
Application Sizing & Pilot Request
Configure this system for your facility.
SNT recommends projection models based on your exact ceiling height, ambient lux, floor surface, and safety message requirement. Submit your data for an application review.
Pilot Validation Process
- 01. Parameter evaluation & optical simulation
- 02. Tailored pilot unit shipment with chosen gobo
- 03. On-site visibility test & pilot pass decision
- 04. Standardized bulk deployment & replication