SERIES: SNT-VS150
PILOT READY
Target Safety Problems
Blind Corner & Intersection Risk
Hazard & Restricted Area Visibility
Pedestrian Crossing Risk
Industrial Projection Hardware
150W Virtual Sign Projector Series
Mid-power industrial virtual sign projector for intersections, pedestrian crossings, hazard zones and sensor-triggered warning symbols.
Power Output
150W reference configuration
Input Voltage
AC100-240V
Typical Height
3-10M
Protection
IP65 Rated
Application Engineering Note
Projection visibility is determined by mounting height, ambient lux, lens optic selection, and floor reflectivity. SNT provides exact Gobo pattern sizing and optical validation prior to pilot deployment.
Engineering Parameters
Technical Specifications & Optical Sizing
All measurements verified at 25°C ambient conditions.
Standard Parameters Verified Values
- Rated Output
- 150W
- Operating Voltage
- AC100-240V
- Optimum Projection Distance
- 3-10M
- Light Source
- High-power LED
- Power / Output
- 150W reference configuration
- Input Voltage
- AC 100–240V, 50/60Hz (verify final model)
- Recommended Installation Height
- 4–8 m recommended application range
- Environmental Protection
- IP65 target/reference; verify final enclosure
- Control Mode
- Always-on / sensor / PLC relay trigger
- Data Status
- Draft reference configuration — verify against final SNT datasheet before publishing
Environmental & Compliance Industrial Grade
- Ingress Protection
- IP65 (Dust-tight & Water Jet Protected)
- Operating Temperature
- -20°C to +50°C
- Housing Material
- Die-cast Aluminum Alloy 6063
- Optical Glass
- High-Transmittance Coated Quartz Lens
Detailed Description & Functional Overview
Mid-power industrial virtual sign projector for intersections, pedestrian crossings, hazard zones and sensor-triggered warning symbols.
Typical Applications
This product series is intended for industrial visual safety projects where configuration must be matched to actual site conditions.Reference Configuration
- Light / Signal Source: High-power LED
- Power / Output: 150W reference configuration
- Input Voltage: AC 100–240V, 50/60Hz (verify final model)
- Recommended Installation Height: 4–8 m recommended application range
- Environmental Protection: IP65 target/reference; verify final enclosure
- Control: Always-on / sensor / PLC relay trigger
Lens / Optical Configuration
- 20° Narrow Lens: 4–8 m — Approx. Ø2.1 m at 6 m. For longer throw and smaller sign.
- 30° Standard Lens: 4–8 m — Approx. Ø3.2 m at 6 m. Balanced size/brightness reference.
- 45° Wide Lens: 3–6 m — Approx. Ø5.0 m at 6 m. Use only where larger projected area is required.
Selection Information Required
Please provide the application, mounting height, projection/detection distance, ambient light, required marking or detection area, floor/environment conditions, trigger logic and project quantity before final configuration. Draft website data: reference specifications must be verified against the final SNT datasheet before publication or quotation.
Application Sizing & Pilot Request
Configure this system for your facility.
SNT recommends projection models based on your exact ceiling height, ambient lux, floor surface, and safety message requirement. Submit your data for an application review.
Pilot Validation Process
- 01. Parameter evaluation & optical simulation
- 02. Tailored pilot unit shipment with chosen gobo
- 03. On-site visibility test & pilot pass decision
- 04. Standardized bulk deployment & replication